| Author | Message | ||
     Anaconda_jiu_jitsu |
hello guys, the cyclops has a 2 prong connector, does this wire in right to the headlight? as in cut the plug off, and install connectors? thanks! | ||
| Anaconda_jiu_jitsu |
i got it, thanks ! | ||
| Save_ferris |
Sorry, didn't see this in time. Glad you got it. | ||
| Portero72 |
Do share! Inquiring minds want to know. Pics or it never happened... | ||
| Save_ferris |
Portero, it's related to an earlier post. http://www.badweatherbikers.com/buell/messages/142 838/793517.html?1474204038 Sorry, I didn't think to take pics when I installed mine. Anaconda, did you get any? | ||
| Anaconda_jiu_jitsu |
It was simple. cut the rubber boot some so the wire slides in, put the boot back on with a tie wrap.[after installing the bulb!] then, just cut the 2 wires that go to the bulb, install female butt connectors, plug n play. | ||
| Save_ferris |
I did the same. Here's a pic of what is delivered, off of Cyclops Adventure Sports' site. The driver unplugs from the bulb, and I zip tied mine to the horizontal metal bar above the headlights. The input side of the driver plugs right into your original headlight connector.  | ||
| Anaconda_jiu_jitsu |
worth every penny!! |
