G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mtdan Posted on Monday, February 02, 2015 - 03:12 pm:        '09 XT fork is 43mm, correct? Besides new oil seals and dust covers what other parts are best replaced at the time of service? thanks.   Electraglider_1997 Posted on Monday, February 02, 2015 - 03:25 pm:        Other than fluid that seems to be all that is necessary. Have fun. To facilitate driving that seal into place real nice and easy make sure that you push those bushing up as far as they are supposed to go. If you don't then the seal will run into it and not seat where it is supposed to. So if the seal just doesn't want to go into place then it is because the bushing wasn't pushed all the way to where it is supposed to be. (Message edited by electraglider_1997 on February 02, 2015)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: