G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Poppinsexz Posted on Saturday, July 26, 2014 - 02:45 pm:        Anyone know the size of the rivets on the chin fairing? Someone replaced the ones on my new to me Uly with bolts..I'm going to put it back factory (Message edited by Poppinsexz on July 26, 2014)   Griffmeister Posted on Sunday, July 27, 2014 - 01:15 am:        You might want to check first to see if the hole was drilled larger. The chin fairing is not that big, take it off and bring it with you to the hardware store. Remember, you'll need backup washers for the back side, hopefully the store will have those too.   Poppinsexz Posted on Sunday, July 27, 2014 - 08:12 pm:        Rivets in now. Used 3/16 by 1/2 inch Looks like new

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: