G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   1badhd Posted on Tuesday, February 11, 2014 - 05:22 pm:        Hi, I'm looking for some help with Memphis Shades Lowers for my Buell Ulysses. Can someone give me the part #"s for the lowers and mounting hardware or what model of motorcycle will fit the Buell? Thanks   Britchri10 Posted on Tuesday, February 11, 2014 - 06:14 pm:        Look in the previous thread where you posted this inquiry. Details are there.... Chris C   Fotoguzzi Posted on Tuesday, February 11, 2014 - 08:12 pm:        about to order the lowers, for mounts, use the universal MEM9890 ? should I get BLUE or CLEAR?   Ourdee Posted on Tuesday, February 11, 2014 - 08:23 pm:        Clear   Fotoguzzi Posted on Tuesday, February 11, 2014 - 08:41 pm:        is there a simple mod to bring those turn signals in closer to the fork? they look like something on an insect or sea creature.   1badhd Posted on Tuesday, February 11, 2014 - 09:16 pm:        Sorry Britchri10 but I did look at my old post I put on the other thread. I didn't want to rob that thread so that's why I posted a new one. Maybe I missed something but I didn't see the info on part #'s or model/yr to order for a Buell. I will look again. Thanks   1badhd Posted on Tuesday, February 11, 2014 - 10:21 pm:        Never mind. I found it.   Pontlee77 Posted on Wednesday, February 12, 2014 - 09:11 am:        find a set of the back turn signals and swap them out they will be closer.   Motorbike Posted on Wednesday, February 12, 2014 - 11:58 am:        I bought a set of clear MS Lowers but when I held them up to the stock XT windshield, they did not match at all, too clear. I sent those back and got the solar tint Lowers, which are not smoke colored but just slightly tinted. They match the stock windshield better but may be just a little darker. Oh well, I guess they don't make any to match exactly. Probably should have just got the smoke colored ones instead of trying to match anything. I have not had time to mount them yet but hope I can get them done before riding season. Thanks.   Mnrider Posted on Wednesday, February 12, 2014 - 04:32 pm:        Foto Yes you remove the turn signals and reinstall them with the spacer inside the mounting area.   Fotoguzzi Posted on Wednesday, February 12, 2014 - 07:51 pm:        Thanks, guess I could have gone to garage and checked it out but that's painful with all the snow out there.   Callawegian Posted on Thursday, February 13, 2014 - 02:38 pm:        I found that the nuts for lamps work on the turn signal stalks. So I eliminated the spacers.   Motorbike Posted on Thursday, February 13, 2014 - 03:40 pm:        I'm guessing Buell put the signals way out there to make them more noticeable and thus safer as they can be seen easier by oncoming traffic? I would guess they would be harder to see if they are closer to the headlight, which can cause glare. I thought about moving mine in but have found it is hard enough to stay alive on a bike nowadays....

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: