G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Chorizo Posted on Thursday, May 02, 2013 - 01:46 am:        For you guys who have installed the SHINDENGEN FH020AA MOSFET voltage regulator, is longer than the standard 36" wire needed ? Seems like at least 48" is needed. Im ordering the super set that comes partially assembled.   Xbimmer Posted on Thursday, May 02, 2013 - 04:53 am:        http://www.badweatherbikers.com/buell/messages/142 838/667134.html Pretty much sums up how I did my setup. Yes I would go 48-60", more flexibility for routing. Mine is still doing great for over a year, daily ridden, no regrets.   Glenn Posted on Thursday, May 02, 2013 - 07:00 am:        I bought and used most of 72". I ran my wiring in the stock location down to the connector 77 location, up to the left rear side of the motor and then back to the right side battery path.   Chorizo Posted on Thursday, May 02, 2013 - 04:09 pm:        Thanks Uly Dudes.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: