G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Djohnk Posted on Tuesday, July 03, 2012 - 07:21 pm:        Hey all, I just ordered all the parts to change my fork oil and seals on my '07 Uly. I guess the forks are 43mm, so will these work to install the seals properly: http://www.ebay.com/itm/Motorcycle-Inverted-Fork-O il-Seal-Driver-Tool-43mm-KTM-/170855851930?pt=Moto rcycles_Parts_Accessories&vxp=mtr&hash=item27c7cd6 79a#ht_1929wt_1167 The listing says KTM, but from the picture they look good ... I have never worked on forks before, so any advice would be appreciated.   Luftkoph Posted on Tuesday, July 03, 2012 - 10:57 pm:        yes they will work,some folks make them out of pvc pipe but I like the real McCoy myself,it's such a sweet feeling when you bury that seal,in the tube.   Panhead_dan Posted on Tuesday, July 03, 2012 - 11:27 pm:        Looks like they will work to me or alternatively, you could just wrap about 3/16" of black tape around the fork tube and shove the seal it with that. Plus you could use the money saved for beer.   Jk651 Posted on Tuesday, July 17, 2012 - 09:33 am:        I've been working on motorcycles for a long time, and I've never used a seal driver. I have always gone the PVC route without a problem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: