G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Loud_and_low Posted on Monday, May 28, 2012 - 06:39 pm:        Just noticed that the front mount on my 06 Uly is worn, the rubber is pretty wasted, I compared it to my 06 XB9 lightning. Its shot. SO, wondering is the mount the same on these bikes? Appears to my eye that they are. Also, could someone please refer me a part number on this? So to be sure I order the correct part. THANKS!   Etennuly Posted on Monday, May 28, 2012 - 08:48 pm:        Check with Al at American Sport Bike. One of our best sponsors here. He can inform you about every aspect of what you need to know, then he will sell you the proper part at a fair price and ship it right away.   Mbest Posted on Tuesday, May 29, 2012 - 01:11 am:        Uly front isolator kit L1501.02A8 mike   Loud_and_low Posted on Tuesday, May 29, 2012 - 09:58 am:        Thanks for the replies. Next question, can I replace the bolt only, I assume that the rubber shock is bonded to the bolt. OR do I need to replace the complete unit?   Etennuly Posted on Tuesday, May 29, 2012 - 10:39 am:        The aluminum bracket has the rubber mount bonded in it's hole. The bolt is one of three that holds it in place. The large center bolt is the active mount bolt. It should come with the kit. Coat it with antisieze to prevent it from rust locking in place.   Loud_and_low Posted on Tuesday, May 29, 2012 - 11:50 am:        Got it. Thanks. Gonna go order the kit now.   Jk651 Posted on Thursday, May 31, 2012 - 03:10 am:        I saw a part advertised somewhere, and now I can't remember where I saw it, but it was some sort of spacer that goes in between the center bolt and the mount that relieves some of the pressure from the motor mount and is supposed to extend the life of the mount significantly. Has anyone seen this?   Schwara Posted on Thursday, May 31, 2012 - 11:12 am:        Jk - I thought I had remembered seeing that product out on the Palmer Products website, but when I just went to their "newer" site: http://s410372035.initial-website.co.uk// I didn't see it listed and I can't seem to access their old website from work: http://palmerproducts.auto.officelive.com/   Blatod Posted on Thursday, May 31, 2012 - 11:56 am:        I imagine Palmer still carries them - I order it about 2 weeks ago and received it just last week. Price was 6pounds plus shipping (i ordered windshield and other things, do don't know shipping cost just for the saver)   Terrible1one3 Posted on Friday, June 01, 2012 - 03:35 pm:        I just did mine... Only big issue was the bolt that goes into the frame was seized. Had to put propane and breaker bar to it to break free. Kit comes with the full bracket and main bolt for the frame, engine bolts are reused. Other than that it was pretty simple. http://www.americansportbike.com/shoponline/ccp0-p rodshow/17158.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: