G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dean Posted on Thursday, May 03, 2012 - 01:09 pm:        on my new to me X... code 21 & the solenoid/valve is sticking. as i rev it it up, i see no movement, but that may be because it isn't under a load? wire it open - the position where you feel tension? can you bypass the check engine light after that? thanks a bunch folks, dean   Froggy Posted on Thursday, May 03, 2012 - 01:26 pm:        You can use ECMspy or TunerPro to disable the EVA functions and trouble code, I wouldn't worry about wiring it open/closed.   Dean Posted on Thursday, May 03, 2012 - 02:44 pm:        Thanks froggy - where do ya get the software ? I have noticed a difference in exhaust tone when pulled "open" ... Throatier ... EBR ECM on want list ... Not offensive muffler ... Maybe ...I don't like LOUD ... Don't want folks to frown when I ride by ...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: