G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pons Posted on Wednesday, February 22, 2012 - 12:45 pm:        I'm going to wire up some driving lights and want to tap into high beam to run lights What color is high beam wire? Looks like it might be the yellow one looking at schematic in manual   Fordhotline Posted on Wednesday, February 22, 2012 - 01:23 pm:        I believe its the white wire for high beams. per 06 Uly manual??   Natexlh1000 Posted on Wednesday, February 22, 2012 - 02:49 pm:        yep. White is high beam. I was just in there redoing my lighting. I used one of the 20A micro relay with tab: http://easternbeaver.com/Main/Elec__Products/Relay s/relays.html I wired a small push button in series with the relay's winding so I can turn them off if I want just the normal high beam. Before you close up the front end of the bike: BEEF UP THAT GROUND. I ended up running a 12 AWG wire from the front of the frame to the instrumentation bracketry.   Pons Posted on Tuesday, March 13, 2012 - 02:57 pm:        I got the driving lights wired, thanks for your help.............

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: