Author |
Message |
Ratbuell
| Posted on Saturday, November 26, 2011 - 09:02 pm: |
|
OK, since I don't have a parts book...anyone know the specs (length/thread pitch) for the bolts that hold the belt pulley to the rear wheel? I have old rotor bolts so I can take those and match them...but I'm planning on good ol' Lowe's hardware, grade 8, with plenty of loctite to build my '10 wheel. |
Gamdh
| Posted on Saturday, November 26, 2011 - 09:10 pm: |
|
AA0609-11CXZB screw, 3/8-16 x 1-1/8 truss hd. torx, scotch grip, bright zinc |
Ratbuell
| Posted on Saturday, November 26, 2011 - 09:15 pm: |
|
Sweet. Thank you! |
Uly_dude
| Posted on Monday, November 28, 2011 - 10:46 am: |
|
are those the same size bolts as used on the rear rotor? |
Gamdh
| Posted on Monday, November 28, 2011 - 07:18 pm: |
|
Not sure... Bolt, rear brake rotor 2006 PN: CA0005.T 2010 PN: CA0005.9A7 Neither parts manual shows the specs in the hardware list like the other one???? |
Uly_dude
| Posted on Tuesday, November 29, 2011 - 10:08 am: |
|
Thanks for checkin Gamdh. I'll figure it out, even if I have to haul the wheel into the hardware store! |
Ratbuell
| Posted on Tuesday, November 29, 2011 - 12:23 pm: |
|
Rotor bolts are different. Smaller. Don't know the spec, but THOSE I do have loose. |
Ourdee
| Posted on Thursday, February 09, 2012 - 03:52 am: |
|
I think they are 5/16-18 x 7/8 (rotor) |
|