G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » BB&D Archives » Archive through May 23, 2011 » Belt Snap / Neck Bearing « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Whisperstealth
Posted on Monday, May 09, 2011 - 11:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well, must not have knocked on wood lately. I've had my first break down on the Uly. For those interested in the stat's. The belt snapped at 22,167 miles. The Uly is a 2009 XT built August 8th 2008.

But, she was kind enough to break while leaving home, after the weekend and not before it! Went to visit my friends for the weekend put about 370 miles on her over the course of it. The last 90 miles or so she just didn't feel quiet right, but believe / believed that to be the work of a bad / loose head bearing.

I developed the "Tick" that many have heard upon hitting the front breaks a little hard. At first I didn't know what it was, but the second time, I recognized it for what many have reported hear. With out BWB I'd would been a little more clueless. I'll do the loosen / re tighten procedure, and hope for the best!

Went to ride her tonight, and put the bike in gear, only to go nowhere : ( So now I need a belt. I will be checking / calling American Sport Bike tomorrow. I'm scheduled to go on a run this next weekend to Mississippi, and need it by Thursday, Friday at the latest. Any suggestions on where to go other than American Sport Bike? A place a guy with less than $200.00 to spend on one can score?
Top of pagePrevious messageNext messageBottom of page Link to this message

Hangetsu
Posted on Tuesday, May 10, 2011 - 01:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hmm, I have recently developed that "tick" as well. Is it safe to assume I should check or get the head bearings checked soon?
Top of pagePrevious messageNext messageBottom of page Link to this message

Whisperstealth
Posted on Tuesday, May 10, 2011 - 02:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes! There are threads on here talking about it. A common thing to try is:

Try loosening the lower clamp bolts on the triple trees.
Remove handlebars. ( just set them down on a towel laying on the breather cover)
Loosen the clamp bolt on the steering head nut. ( the chrome round allen nut)
Now break loose the allen nut and retighten to factory torque specs.
Tighten the clamp bolt.
Tighten the lower triple tree clamp bolts.
Install handlebars.
If you still have the clicking sound then you need to replace the bearings.


http://www.badweatherbikers.com/buell/messages/142 838/615291.html

I have a red XT like Loyd.... So hope retightenig will work, and not just for a few weeks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Whisperstealth
Posted on Tuesday, May 10, 2011 - 02:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hangetsu, I see you have an 09 as well. How many miles are you at?

Wonder if this is to be an 09 "thing"?
Top of pagePrevious messageNext messageBottom of page Link to this message

H2opatrol
Posted on Tuesday, May 10, 2011 - 08:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

My '09 did it at 2k
Top of pagePrevious messageNext messageBottom of page Link to this message

Portero72
Posted on Tuesday, May 10, 2011 - 09:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

My 09 had the tick. Under warranty, tech loosened all the bolts in the front end, tapped around to let everything settle, re-torqued, it has been fine since. I believe it happened at about 14k, have 32k on her now.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hangetsu
Posted on Tuesday, May 10, 2011 - 04:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Whisperstealth,
I'm just coming up on about 18,000. I probably first noticed the click about 1K ago. It hasn't become any more frequent or louder, but I will check it out ASAP.
Top of pagePrevious messageNext messageBottom of page Link to this message

Whisperstealth
Posted on Tuesday, May 10, 2011 - 06:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Pottero72,

Do you happen to know if the tech loosened the axle bolts as well? Thanks!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration