G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mnviking Posted on Friday, April 08, 2011 - 08:33 pm:        I'm 6'6", would love it if my hands were about an inch or two higher. Any ideas on how achieve that on my Uly?   Ronmold Posted on Friday, April 08, 2011 - 09:18 pm:        Rox risers american sport bike   Mnviking Posted on Saturday, April 09, 2011 - 12:28 am:        Do these really work well? They look like they might shift or rotate a lot if one plays in the dirt frequently.   Buellhusker Posted on Saturday, April 09, 2011 - 12:57 am:        I have these on my 09 Uly and they do not shift or rotate after mounted. They are great if you stand up riding in the rough stuff, or just riding down the highway.   Mnviking Posted on Saturday, April 09, 2011 - 01:04 am:        Good to know. I stand up a lot. Being a big dude, I was worried that they'd shift a lot on me.   Pontlee77 Posted on Saturday, April 09, 2011 - 07:12 am:        Pre eng does have risers.   Bryn1203 Posted on Wednesday, April 13, 2011 - 05:12 pm:        I have 2" risers & they are fine - but they do stretch the throttle & clutch cables. Anyone know of longer throttle cables, or if made-up longer cables can be used. Cheers   Ronmold Posted on Wednesday, April 13, 2011 - 06:48 pm:        If you narrow the bars and bring the perches closer together you gain a little cable length. I cut 7/8" off each end with a pipe cutter.   Crusty Posted on Wednesday, April 13, 2011 - 07:10 pm:        I used the 1" risers from Precision Engineering. They did the job for me. http://www.preeng.com/xcart/product.php?productid= 5&cat=0&bestseller=Y   Froggy Posted on Wednesday, April 13, 2011 - 07:27 pm:        You can gain some more cable slack by rerouting them.   Prowler Posted on Thursday, April 14, 2011 - 11:36 am:        "Pre eng does have risers." I believe that those are the ones I'm using and they fit great and didn't require re-routing of cables, etc.......   Uly_man Posted on Thursday, April 14, 2011 - 12:22 pm:        Mnviking. I did what Ronmold has done. I cut 25mm off each end of the bars and rotated the bars up. It may sound strange but it works great on the road as the bars are Enduro style and make steering over sensitive for me. Off road use riser blocks but I would use custom bars myself. I am 6'7" myself.   Mnviking Posted on Thursday, April 14, 2011 - 12:25 pm:        6'7"?? You're a tall drink of water my friend. I've always wished the stock bars were both wider and higher.   Sayitaintso Posted on Thursday, April 14, 2011 - 01:04 pm:        I've always wished the stock bars were both wider and higher. That sounds like you're inviting a comment from Froggy, I've heard him call the stock bars ape hangers before. But I'm with you, a little higher would suit me just fine.   Uly_man Posted on Thursday, April 14, 2011 - 01:16 pm:        NO Mnviking I am a tall large JD.   Mnviking Posted on Friday, April 15, 2011 - 01:47 am:        Jack Daniels??

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: