G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Uly_man Posted on Tuesday, March 29, 2011 - 03:59 pm:        It has always been said that the ball bearing type head race/steering head bearings would be better with a taper/roller type but none have ever been found that fit. This company on E-Bay have them and I have asked them if they fit ok and they say they do at 1 inch ID and 1.98 inch OD for both bearings. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&it em=250750756910&ssPageName=ADME:X:RTQ:GB:1123 Just a thought. Who knows. OEM is 25mm ID, 50mm OD, 10.5mm high OD and 14.75mm high ID for both bearings.   Pontlee77 Posted on Tuesday, March 29, 2011 - 04:17 pm:        Hi, I just fitted those bearings to the Uly of my friend the fit perfect the trick is to put them in the freezer the day before install to make a bit easier to fit them in, and prepare a good amount of grease for them. If I ever do need to change mine I'd get those bearings for my bike, plus the dust seal looks really good.   Uly_man Posted on Tuesday, March 29, 2011 - 04:27 pm:        Cool here is a trumpet then. http://www.youtube.com/watch?v=JXtuVCgtDSY&feature =related   Ourdee Posted on Tuesday, March 29, 2011 - 07:02 pm:        I have a new OEM and these are the measurements in in. .998" ID, 1.9805" OD, .417" high OD, .580" high ID

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: