G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Itileman Posted on Friday, December 17, 2010 - 10:10 pm:        I recently acquired a set of black Acerbis Rally Pro hand guards. Looks like they aren't going to fit unless I go to shorty levers or chop off the ends of the stock ones. Anybody have experience with this or any thoughts? Tried the search, but got zip for the Acerbis.   Coolice Posted on Friday, December 17, 2010 - 10:40 pm:        They will work, I had them on my 06. The plastic will bend when you mount them.   Rwcfrank Posted on Friday, December 17, 2010 - 10:55 pm:        I had the same problem and it required much adjusting and a couple of washers. I will work but its a zero clearance deal. I just went to shorty levers which cleared everything up.   Itileman Posted on Friday, December 17, 2010 - 11:44 pm:        Which shorties did you use? I ride so much off the tarvy that they make sense go with the Acerbis guards.   Rwcfrank Posted on Saturday, December 18, 2010 - 11:32 am:        I used the knock off Pazzo's on ebay from china. They are really nice for $30. Do an ebay search for buell levers, you wont be dissapointed.   Itileman Posted on Saturday, December 18, 2010 - 01:35 pm:        Thanks for the info.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: