| Author | Message | ||
     Gusmiami |
Does anyone know if the turn signals from a 2010 Uly will fit on a 2008 Uly? Is it a direct swap? Seems as though the 2010 turn signals aren't as flexible and therefor won't wobble and bounce around like pre-2010 models do. That's one of the few things that's always driven me nuts about my uly and if I can swap those out it would be great. | ||
| Hotcad |
Yes they will, I put them on my 07. They work fine. | ||
| Gusmiami |
Am I correct in that they don't flop around like the pre-2010 models? | ||
| Treefrog |
I put them on the front of my 08 and they still flap like they are trying to fly away. | ||
| Gusmiami |
That sucks. How hard could it have been to make some rigid turn signals that wouldn't flop around like a fat girls ass while jogging | ||
| Gambito |
I put a set on my '09 for the looks, the originals were too ugly for me. Chances are they'd just snap off if they couldn't flop around... | ||
| Mnrider |
If you take the spacer off the front T/S and put it on the inside of the dash housing they don't flap as much. | ||
| Treefrog |
I don't mind the flapping. While stopped I always get the, "Hey your blinkers are broke". Then watch their faces as I feed a little throttle to it and they smooth out. | ||
| Blk_uly |
"A fat girls ass while jogging" BAD visual on that one  | ||
| Gusmiami |
Hey it got the point across didn't it? | ||
| Nadz |
The interface is the same, and the appearance is definitely worth the expense. If you get the 2010's, just get rears for the front. No extender so less jiggling. |
