G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Sharkguy Posted on Sunday, August 01, 2010 - 11:35 am:        Does anyone have the Palmer comfort pegs installed with the right side comfort kit (scoop). If so what kind of drilling/ fabbing to the scoop did you do in order to install them? I'm thinking about these but they don't look like they'd fit with the right side scoop.   Ironhead1977 Posted on Sunday, August 01, 2010 - 11:39 am:        I have both. It is a PITA,but well worth the effort.You just have to use a best guess on hole position then go from there.   Ronmold Posted on Sunday, August 01, 2010 - 02:00 pm:        I removed the Palmer SS spacer on the right side and bolted the downrod closer to the frame. A little dremel work and it fits but I lost the use of the bottom thread insert. I added a couple slots & hold the bottom together with a black tiewrap.   Sharkguy Posted on Tuesday, August 03, 2010 - 04:15 am:        Thanks guys. I'm still not sure I want to go this route.   Ronmold Posted on Tuesday, August 03, 2010 - 07:51 am:        I'll post a pic tonight.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: