Author |
Message |
Johnboy777
| Posted on Tuesday, July 13, 2010 - 06:09 pm: |
|
I need a 2 inch riser for my Magura EX 1-1/8" X-LINE BULGE BARS - any thoughts? Thanks LINK: http://www.oemcycle.com/Item/product/1670/PU/M0446 274/Bend_EX . |
Ft_bstrd
| Posted on Tuesday, July 13, 2010 - 09:36 pm: |
|
Precision Engineering (Badweb Sponsor) |
Johnboy777
| Posted on Tuesday, July 13, 2010 - 11:34 pm: |
|
Hey Fatty, Yeah, I looked at PE - both of his fat bar risers are only 1" and his 2.5" riser is 7/8" to 7/8" fitment. I need a 2" riser from 7/8" to 1-1/8" My Magura bars are 1.7" lower than stock, so a 2" riser gives me only + 0.3" .. which is fine, I'm happy with the stock height. . |
Ft_bstrd
| Posted on Tuesday, July 13, 2010 - 11:38 pm: |
|
PE can actually produce a riser to your specifications. Email them what you are looking for. It wouldn't be hard to make their 1" 7/8 to 1-1/8" a 2" riser. |
Johnboy777
| Posted on Wednesday, July 14, 2010 - 06:49 am: |
|
Thanks, Fatty, I'll give them a call, |
Chrisrogers3
| Posted on Wednesday, July 14, 2010 - 04:27 pm: |
|
Or go with the Rox 2 inch risers from American Sport Bike. I had them on my Uly and loved them. |
Johnboy777
| Posted on Wednesday, July 14, 2010 - 05:24 pm: |
|
""Or go with the Rox 2 inch risers from American Sport Bike. I had them on my Uly and loved them."" Yeah, I'd love to get those, but I need 7/8" to 1-1/8" All the ones I've seen are 7/8" to 7/8" . |
|