Author |
Message |
Marks3tbillet
| Posted on Tuesday, July 06, 2010 - 06:20 pm: |
|
Got the power fed from the battery and the light bar mounted. I'm using the Palmer Products kit and an Autoswitch so I can tap the flash to pass light twice to power the lights. I have the service manual, but want to confirm with others who have added these lights. I think I need to tap the factory blue wire for the Autoswitch power and the white wire for the Autoswitch trigger. Thanks for any help, Mark |
Marks3tbillet
| Posted on Tuesday, July 06, 2010 - 09:59 pm: |
|
I found all the topics using the search function, but none mentioned which factory wires to tie into. I am also wondering where others have tied in, which side of the factory connectors. I have the full Palmer kit with relay, etc. Thanks, Mark |
|