G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Cyclonedon Posted on Sunday, June 13, 2010 - 06:19 pm:        last night I rode my Uly out to Gurnee Mills, about a 10 mile, to the Verizon store. My motorcycle ran great as usual but when I started it up to ride home, it was running only on the rear cylinder. I made it home and today went and took the front plug out and it was dry. I started it with the front plug out and it is firing ok but not getting gas to the front cylinder. What should I look for next. Tomorrow is Monday and no cycle shops are open on Monday which only leaves me Tuesday to get it fixed before the start of Homecoming on Wednesday. Any suggestions???   Hughlysses Posted on Sunday, June 13, 2010 - 06:24 pm:        I guess first thing would be to make sure the electrical connector is pushed onto the front injector properly. Try to trace the wiring to that injector and make sure there's not a break or a short somewhere. The shop manual may have checks for the injector as well.   Tootal Posted on Sunday, June 13, 2010 - 07:12 pm:        ECMSPY has a test for the injectors if you have it or a friend has it. I would think you would get a check engine light if it failed.   Cyclonedon Posted on Monday, June 14, 2010 - 01:14 am:        I didn't get any check engine light! ??????????

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: