| Author | Message | ||
     Discochris |
Checked today, and the full kit number for the 2010 wheel upgrade in black is listed as obsolete, and no dealer in the US has one. It may be posted here, but I couldn't find it in searching. Does anyone know the numbers for the wheel alone, and the bearing/axle/spacer kit? | ||
| Rwven |
This is what I have on my bike. An XT with the Villain Black Wheel. 1 x G0309.7AAYT $228.00 1 x G0620.5AK $4.84 2 x EA0002.5AK $6.00 3 x E0005.5AK $36.48 1 x G0321.5AK $44.40 1 x G0323.5AK $11.68 Sub-Total: $331.40 Standard Shipping (Ground): $16.75 Total: $348.15 | ||
| Hughlysses |
Rwven- which one of those pieces is the axle? G0321.5AK? My 2010 axle was lightly scratched when I installed my kit. Apparently the axle hole in the swingarm had a piece of grit in it or a slight raised spot. The axle feels smooth to the touch, but it's got a spiral on the outside (including the seal seating area) where the black coating is scratched off. I've been running it for a few thousand miles with no apparent seal damage, but I was just thinking I'd get a new axle while they're still available and take precautions to avoid scratching this one during installation. | ||
| Rwven |
Hughlysses- Yes, that is the axle. | ||
| Discochris |
Thank you very much! | ||
| Tankhead |
Does this one have the larger bearings (three vs. two) | ||
| Discochris |
Of course I could put the silver X wheel kit on the back, but it would look a bit strange... |
