Author |
Message |
Terrible1one3
| Posted on Sunday, April 25, 2010 - 08:55 pm: |
|
I'm planning on painting my side and top case piece that has the round Buell stickers on it. Is there any trick to removing the stickers and being able to re-use them? Can I buy just the stickers? I e-mailed American Sport Bike with the inquiry. My frame paint comes in Tuesday and I am torn between that color and a satin black. Thanks |
Two_buells
| Posted on Sunday, April 25, 2010 - 09:44 pm: |
|
I just ordered the Ulysses emblems on the side and wind screen, dealer called me and their in. you should be able to get the Buell emblems 90098-05Y they are only 3.50 if you want to pry off the ones on your cases try a heat from a hair dryer than peel them off. |
Etennuly
| Posted on Sunday, April 25, 2010 - 09:47 pm: |
|
I carefully masked around mine. I have painted some a couple of years ago for other folks who had already removed them, they got new ones from Hepco Becker. I don't know if they still service them through HD. |
Bobbuell1961
| Posted on Sunday, April 25, 2010 - 10:32 pm: |
|
I clipped a deer, the next day in the light i took a look around and that was one of the few things i found and kept, it's still in my truck. not the recommended method, LOL |
Pso
| Posted on Monday, April 26, 2010 - 09:12 am: |
|
I plan on taping aorund mine when I pain tthe inserts once I get the new body work. |
Tk052
| Posted on Monday, April 26, 2010 - 09:15 am: |
|
Apply either Googone (Wallymart) or WD-40 to the top of the Buell circle several times, letting it seep behind to soften the glue/foam double sided tape. Take you time. If you want to use heat try a hair dryer instead of a heat gun as the temp. is not as hot (around plastic saddlebags!) and will do the trick. |
Ratbuell
| Posted on Monday, April 26, 2010 - 09:16 am: |
|
Heat and a dental pick (or similar small prying device) will remove 'em just fine. I've re-used my set twice now, but do have a spare set in case I decide to repaint my bags in either a different color (thinking about textured black), or doing the orange the *right* way and not with plastic model spraypaint LOL. Make sure to get the right set for your bags, though. I want to say the Journey bags are a 45mm circle, and the Outdoorsman bags have a 52mm circle.... |
Tankhead
| Posted on Monday, April 26, 2010 - 01:53 pm: |
|
Are the Buell stickers for the Outdoorsman bags available through H/D dealer? |
Pso
| Posted on Monday, April 26, 2010 - 04:36 pm: |
|
Ratbuell: If you go with the textured black how about a write up of your experience? How you like it etc. I suppose you also mean you sre going to use th eKrylon fusion stuff? i am contemplating the same, but would like someone to jump into the water first |
Terrible1one3
| Posted on Monday, April 26, 2010 - 10:23 pm: |
|
Pso I know a guy who painted is CBR1000 with the texture black truck bed liner Rust-O-Leum paint. I just sprayed my truck bed with that last weekend. The stuff looks great and is amazingly forgiving. I put my hand on the wheel well about 30 seconds after it was sprayed, just wiped the smudge away with a towel and painted over it and it looks mint. I even sprayed over some water drops and you can't even tell. That stuff is amazing and makes for a real rugged look. I'm not sold on satin black for the inserts so I think I am going to try the Buell frame paint first, if it looks like dung I'll go satin black. |
Ratbuell
| Posted on Tuesday, April 27, 2010 - 10:31 am: |
|
I'm partway there - I did the gray rubstrips quite a while ago on my bags, and it's pretty near a dead-nuts match to the black plastic:
|
Ratbuell
| Posted on Tuesday, April 27, 2010 - 10:33 am: |
|
Hm. Looking at that pic...maybe doing the square recess (where the red reflector is) in orange, to tie the bag to the bike color-wise, and doing the (kick-prone) top panel in the black...might look good? |
Terrible1one3
| Posted on Tuesday, April 27, 2010 - 10:48 am: |
|
What is the red around the seal? A different weatherstrip? Does it work better? |
Ourdee
| Posted on Thursday, April 29, 2010 - 09:22 pm: |
|
Reflective stripe, I did it to mine on the back. |
Yamafreak
| Posted on Thursday, April 29, 2010 - 09:38 pm: |
|
90098-05Y mine have been on back order for months! |
Terrible1one3
| Posted on Friday, April 30, 2010 - 12:20 am: |
|
I just taped over them and painted. Turned out looking EXCELLENT! |