G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Df3112 Posted on Monday, March 15, 2010 - 01:41 pm:        Anyone have photo's and or comments / suggestions of the o-ring throttle lock on a ULY w/hand guards? Thanks!   Bdrag Posted on Monday, March 15, 2010 - 02:27 pm:        Df3112 I have a Vista Cruse POS that works well but takes up a little room on the grip. Shoot me an email and I will send you a few pics tonight after work.I had to fab a small bracket that attaches to the hand gaurd screw. Easy job. BDRAG   Ulynut Posted on Monday, March 15, 2010 - 02:51 pm:        I know Froggy has a pic of it. PM Crusty, he was passing them out one day.   Druelly Posted on Monday, March 15, 2010 - 03:50 pm:        I have been using one that I picked up at an auto parts store for $1. I think it is 2 1/2 inches maybe 2 1/4. It works great for long runs, like when you are cruising, but I take it off when I know I am going to be using the throttle like in the twisties. dru   Oldwesterncowboy Posted on Monday, March 15, 2010 - 04:15 pm:        I have this http://goo.gl/XQsO works great how do post a pic here.   Bdrag Posted on Monday, March 15, 2010 - 06:03 pm:        Oldwesterncowboy Thats the same thing I have. I had to make a bracket that replaced the stand off that clamps around the bars. Tied it to the Handgaurd screw. Wish one of these know it alls would post us on how to post a pic. To much trouble I guess to answer the same guestions over and over! AHhahaaaaaa. Lets start an oil / tire / chain lube thread. Oh thats right, we have belts now. HAhahaaaaaaa. BDRAG   Ftd Posted on Monday, March 15, 2010 - 06:49 pm:        Installing Vista Cruise throttle lock It entails: Trimming traction grip back from switch housing (before installing grip) Trimming tab off throttle lock Drilling a small hole in throttle lock and housing for a small bolt/nut to secure throttle lock   Bdrag Posted on Monday, March 15, 2010 - 06:54 pm:        Lets try a pic here. Hummm? Did it work? BDRAG   Bdrag Posted on Monday, March 15, 2010 - 07:01 pm:        Ftd I did a simular thing on my V Strom. Drilled and tapped the housing for a small 4-40 screw. It works but its broken off once already. Had to grind the ID some and the parts that hold the two halves together to get it to fit friction free. It would not hook on the cables as intended on the Strom. Mine is slightly different than the one in your pic but basically the same. The Vista cruise one I have on the Uly does take up 3/8 of an inch of grip but I have fat pudgy hands and still have good access on the grip with winter gloves on. BDRAG   Oldwesterncowboy Posted on Monday, March 15, 2010 - 07:53 pm:        Bdrag I like your bracket, I just moved the brake over sorry - crappy camera phone pics (Message edited by oldwesterncowboy on March 15, 2010)   Bdrag Posted on Monday, March 15, 2010 - 08:08 pm:        Oldwesterncowboy I could not move mine over due to the mirrors are already to far inboard, I can barley see past my wide ass. Also where you have yours bothered me reaching the controls with my big ass pincher. HAhahaaaaa. BDRAG   Badrap Posted on Monday, March 15, 2010 - 10:33 pm:        this is one I made that uses an o-ring.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: