G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tipsymcstagger Posted on Monday, March 01, 2010 - 04:24 pm:        Not sure if they're sponsor so I won't mention a name but one of the 20%-off dealers has free shipping on orders above $150 for the remainder of today. I'd like to order both wheels and all of the other bits I'll need (bearings, axles, bolts, etc). I know the info has been posted before but I'm hoping someone might have it on hand to quickly repost? I only want what's necessary to install the wheels. In other words, if my existing pulley and rotor, etc are compatible, I don't want/need those part numbers. TIA. Tipsy   Court Posted on Monday, March 01, 2010 - 04:37 pm:        All you need is the wheel kit I have previously posted.   Tipsymcstagger Posted on Monday, March 01, 2010 - 04:45 pm:        Thanks Court...reuse all existing hardware??? I know you'd posted some part numbers for screws/washers/bolts in the past. Wasn't sure if those are necessary or if you were just being conservative in replacing them. I need the part number for 2010 front wheel "kit" too, if someone has it handy??? Both of my wheels are bent pretty badly so I might as well get a matching set. TIA. Tipsy   Court Posted on Monday, March 01, 2010 - 04:51 pm:        NO. Order replacement hardware, screws, washers, etc (E and F below). It's easy to get stuff but don't reuse hardware. Screws and something else . . . I'll scan my invoice and send you tonight if you'll e-mail me a reminder.   Tipsymcstagger Posted on Monday, March 01, 2010 - 04:54 pm:        quote: Screws and something else . . . I'll scan my invoice and send you tonight if you'll e-mail me a reminder. No need Court...I found your old post with the part #'s for the hardware. But I can't seem to find any info for the front wheel??? Anyone??? Tipsy   Court Posted on Monday, March 01, 2010 - 04:57 pm:        What front wheel do you want/need? Just a spare? They are ( to the best of my knowledge) all the same. Just include the word FROGGY in the post and Little Cat "X" will be here in a moment to confirm and provide part numbers. You gotta admit . . . this place is the BOMB.   Tipsymcstagger Posted on Monday, March 01, 2010 - 05:03 pm:        LOL...thanks Court. I was under the impression that the 2010 front wheel was redesigned too. I know there were no bearing problems with the front wheels...but I thought I'd read that the part # for the front changed in 2010 as well. If that's not the case, I'll just look up the part number(s) for the 2008 front wheel in my parts manual. Tipsy   Froggy Posted on Monday, March 01, 2010 - 05:03 pm:        No changes to the front wheel for 2010. G0110.1AKAYBQ WHEEL, FRONT, MAGNESIUM TONE Retail Price:$336.00 Get the rotor and mounting hardware from EBR, its cheaper than HD.   Court Posted on Monday, March 01, 2010 - 05:05 pm:        >>>I was under the impression If Froggy and I need you to think . . . you'll be so directed.   Tipsymcstagger Posted on Monday, March 01, 2010 - 05:11 pm:        quote: No changes to the front wheel for 2010. G0110.1AKAYBQ WHEEL, FRONT, MAGNESIUM TONE Retail Price:$336.00 Get the rotor and mounting hardware from EBR, its cheaper than HD. Too funny! I just sent you an email, Froggy...two seconds later I see this! EBR has the hardware for both front and rear??? Tipsy

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: