| Author | Message | ||
     Unravels |
Have any of you noticed interference between the memphis shades fork bracket and the clutch cable on the right side when turn steering to lock on left side. Also appears clutch cable may rub against exposed threads on pinch bolt. Just a thought. I wrapped the clutch cable in electrical tape for now. Will have to think of a permanent solution. Would suck to have wind protection but create condition that causes a clutch cable failure. Appears also on rt side brake line will rub on rt side bracket. Dont think this will be an issue though due to the brake line being steel braided w/ teflon coat, it will rub against flat edge of bracket |
