G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » BB&D Archives » Archive through January 17, 2010 » Solar Charger in Dash socket « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Thisflatearth
Posted on Monday, January 11, 2010 - 09:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I purchased a solar charger that plugs into the "cigarette lighter" socket on a car/motorcycle. It is the infamous VW ebay model.

My question is, will it back charge the battery through the socket even though it is hooked to the ignition?

Does the ignition disconnect work both ways?

If so I will try and modify it to fit into my battery tender plug or add an accessory socket directly to the battery.

thanks
dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Rwven
Posted on Monday, January 11, 2010 - 09:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

No can do...You'll have to rig something to an always on circuit or direct to the battery.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hughlysses
Posted on Monday, January 11, 2010 - 09:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The ignition switch disconnects the accessory outlets when it's turned off, so it wouldn't work to charge your battery that way. I suppose you could just cut the plug off and hook the leads directly to your battery though.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Monday, January 11, 2010 - 11:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'd lop the end off the charger (make note of the polarity first!!) and hook it to a battery tender lead.

If you want to be able to use it on multiple vehicles (like a car), make sure to leave some wire on the cig lighter end so you can splice another battery tender plug onto it, so you can plug it back together. Just remember to keep the polarity straight.

If you're using it on a car, the same rule applies - you have to have a battery-hot lighter/outlet (works even with the key off)in order for it to work. Any ignition-switched outlet is "disconnected" when the key is off, and you'd be doing absolutely nothing plugging into that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ronmold
Posted on Monday, January 11, 2010 - 05:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Time to convert the dash socket to always-on as I will do this Spring. Run the hot lead of the 12v dash socket to one of the red wires that go to the key-switch. It's fused at 15A but you may want to use a small inline fuseholder with a 5A that would blow first if there was a fault as smoking the 15A will shut down your ride fast!
Top of pagePrevious messageNext messageBottom of page Link to this message

7873jake
Posted on Monday, January 11, 2010 - 10:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have a SunlinQ 6.5 watt folding solar panel that I thought would marry up nicely with a little luggage rack that fits atop the Journey topcase I saw one time somewhere in a picture (but can't recall at the moment). With a little creatively hidden wiring and some small black bungee material to attach it to the goofy little rack, this flexible, folding solar cell could be adapted to trickle/maintain a Uly batt pretty easily.

The SunlinQ cell is super thin and flexible but looks and feels nearly bombproof.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Tuesday, January 12, 2010 - 09:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ronmold - if it were me...I'd convert the underseat plug, that way you'd still have "normal" use of the dash circuit for running GPS or some such, and not having it drain the battery at key off.

But that's just (always-forgetting-to-turn-stuff-off) me : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Rwven
Posted on Tuesday, January 12, 2010 - 10:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Here is all you need. No cutting of wires and splicing and all that...

http://www.spoiledbiker.com/pac024-18.html
Top of pagePrevious messageNext messageBottom of page Link to this message

Ronmold
Posted on Tuesday, January 12, 2010 - 05:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

No cutting or splicing? Gee what fun is that....
Yeah, rear socket would be very easy

(Message edited by ronmold on January 12, 2010)
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration