| Author | Message | ||
     Jphish |
Switched the pins on connector under the fly screen back to stock from my previous attempts to have both lights on @ high beam setting. Like the jumper wire idea better, so it will be back on original circuits. Now I'm attempting to solder the bridge wire between the Yellow/Blue wire on the high/low beam switch. Problem is: I removed the screw on the white plastic piece holding the switch in but can't get assembly out of housing to do the soldering. I've applied about as much "pull" as I'm comfortable with (don't want to bust the thing in process of 'fixing' it) - Is there a 'trick to getting the little bugger out a' there ?? Pull up? down? sideways? push it though from the rocker switch ? Any insights, council, assistance appreciated. Thanks, j | ||
| Jphish |
NEVERMIND: Figured it out from 'Spikes' old January thread / instructions. |
