Author |
Message |
Radioelasais
| Posted on Wednesday, September 16, 2009 - 10:05 pm: |
|
I replaced my stock 12STT bar with a clubman and I would feel more relaxed if my clutch cable was a bit longer. Do you guys know if 1) the Uly bar is taller/wider than the S' bar? 2) would some of you measure the length of the clutch cable? wider questions maybe? thanks gianluca |
Froggy
| Posted on Wednesday, September 16, 2009 - 10:46 pm: |
|
The Uly bar is taller and about the same width as the various S bars. |
Froggy
| Posted on Wednesday, September 16, 2009 - 10:48 pm: |
|
Uly bar in the background, S bar up front: Oh yea, the Uly cables are longer. |
Etennuly
| Posted on Wednesday, September 16, 2009 - 11:08 pm: |
|
When I did a bar change on my City-X I went higher and wider. It left the clutch cable too short. I moved it out of its original position where it ran through a hole on the top triple clamp, to outside the left fork. I fastened it with a tube clamp(metal loop with a screw hole) and a couple of reinforced zip ties. |
Radioelasais
| Posted on Wednesday, September 16, 2009 - 11:09 pm: |
|
froggy, you are an asset to this forum. that pic is much more than 1000 words. I'll get a uly clutch cable (when time to replace it will come ...) gianluca |
Radioelasais
| Posted on Wednesday, September 16, 2009 - 11:11 pm: |
|
I moved it out of its original position where it ran through a hole on the top triple clamp, to outside the left fork. that would be something to consider ... I'll look tomorrow. Do you have any pic handy to see how it looks? |
Etennuly
| Posted on Thursday, September 17, 2009 - 12:10 am: |
|
I wish I did. I sold that City-X shortly after getting my uly in early '06. Any pictures that I had went down with the hard drive they rode out on. Sorry It did work well, though it looked prettier in the original hole. |