| Author | Message | ||
     Joesbuell |
Here's an update video of my 09 Uly, I have just modified this muffler. First day of Spring here in Queensland Australia  Cheers Jodie http://www.youtube.com/watch?v=44VB0FDaqhw | ||
| Obuell1_kanoby |
Wow! that sounds awesome! What did you do to make it sound like that? Looks like you shaved off the rear & added a stainless outlet.........I want my 07 to sound like that!!!! | ||
| Jcbikes |
Nice video. Details please of what you did to the pipe with pictures. | ||
| Trevd |
You're gonna get killed riding on the wrong side of the road like that!!  | ||
| Electraglider_1997 |
Was that video taken with a mirror? Crazy Aussies. Loud bikes save kangaroos. (Message edited by electraglider_1997 on September 01, 2009) | ||
| Electraglider_1997 |
 | ||
| Nipsey |
Great video! BTW you got a headlight out..... | ||
| Woodreaux |
Great sounding pipe-fun video. Thanks for posting it. | ||
| Jphish |
Those Aussie Buell riders are Holligans I tell ya - Holligans!! Unlike us staid law abiding North Americans (that includes our Canadian cousins - since they too drive on the correct side of the road) Nice sound clip! | ||
| Dride |
That sounded SWEET! | ||
| Joesbuell |
Thanks everyone for your comments  Yes we are crazy down here! ridding on the wrong side of the road! Toby this what I did. Sorry no pictures...I was in a hurry to get it done before work! I cut the muffler from just rearwards of the 2 mount straps, you may be able to wiggle the inside secton out if your lucky, but I wasn't as when pipe was fitted at the factory the tension on the starps crushed the outer housing making removal difficult! I just cut the seam on the under side all the way, then with some flat blade srew drivers pried it open enough to slide the insides out!! Yeha! Next I rewelded the seam I had cut open, paying attention to align it all up nicely. Next I sat the cut open end of the muffler on a piece of 3mm steel(I only had some stainless so thats what I used) I roughly cut the piece out. I went to my local auto parts store and bought a 2 and half inch stainless steel exhauts tip. I cut the end of the tip on an angle to suit how I wanted it to look. I then marked out on the flat steel where I wanted to mount it. I used a drill to drill around were the outlet would be then cleaned up the hole with some files. I then welded the outlet into position then welded the flat sheet with the outlet onto the exhaust body. I then cleaned up all the the welds the painted with some high temp stove paint. There is no baffling in the muffler whatsoever! aparantly the early drummers were done that way. I believe mine looks and sounds awesome I have not done any tuning to it yet, My ealier attempt popped really bad on deceleration! this one just lets out a few  power feels really stong through the low to midrange which is how a Buell should be. Oh I also just removed the cable off the exhaust valve, I did not modify that in any way. Cheers Jodie Craig that's not a Kangaroo it's a Brush-tailed Rock Wallaby This is a kangaroo!  | ||
| Obuell1_kanoby |
Thanks for the update, thats what I'll do to my stock exhaust! I like that rumble....  | ||
| Electraglider_1997 |
That Roo has been pumping iron. Just look at those guns. |
