G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pso Posted on Monday, August 17, 2009 - 11:24 am:        I replaced my pads last weekend. The SM talks about a screw plug that is screwed into the end where the pad hanger pin is bolted into the caliper. My rear brake has one, but my front brake did not have one. Is there a locking screw cap on the front caliper as stated in the shop manual?   Xbimmer Posted on Monday, August 17, 2009 - 11:52 am:        My '06 doesn't have a plug either, just the threaded pin hanger. No room for a plug anyway.   Bienhoabob Posted on Monday, August 17, 2009 - 12:06 pm:        Same as my '06, plug in rear, no plug in front.   Pso Posted on Monday, August 17, 2009 - 01:58 pm:        Thanks-I did not see how there would even be room for a plug, but when they gave torque specs for it, I started to wonder what is going on here.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: