G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   David_e Posted on Friday, May 29, 2009 - 12:23 am:        Any one done this on a Uly? I had the right side case replaced because the dealer made a mistake and messed it up . This happened about 6 months ago....now the cam shaft seal is leaking. Is it difficult to replace?   Hughlysses Posted on Friday, May 29, 2009 - 06:16 am:        David- IIRC, it's pretty simple. Drill out the rivets, remove the timing cover, scribe a mark so you can replace the cam timing sensor in the correct position, remove the timing sensor. Get a hook-type seal puller and carefully pull out the existing seal (without scratching the sealing surface on the cam!). Tap the new seal into place using a suitably sized socket, reassemble. Of course you SHOULD refer to the shop manual to be sure!   David_e Posted on Thursday, June 04, 2009 - 01:40 am:        Thanks Hughlysses. Thats a big help. I have a few issues with my bike the cam seal is just one of them. I love the bike and I have 20,000 mi. on it. I'm confident I can take care of these issues with some help from my friends. Thanks.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: