G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » BB&D Archives » Archive through April 09, 2009 » A cople fo lights on the dash board « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Pontlee77
Posted on Tuesday, April 07, 2009 - 10:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hello Guys, and Gals,

Here is my problem, when i start the bike all is fine, if i turn completely the handle bar to the right the neutral light goes off and the oil/problem light turns on, i put on my bike the 07 cable router, and laos had to change the front fairing, my bike is a 06 uly, can any one guide me, i'm not looking forward to taking the front end apart again.

Thanks,

Miguel
Top of pagePrevious messageNext messageBottom of page Link to this message

Mnrider
Posted on Tuesday, April 07, 2009 - 11:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sure sounds like you have broken wires under that cable router.You'll have to remove the flyscreen and the headlight assy. and the router and cut the tape off the harness to inspect those wires.My cable router had a sharp plastic edge poking my harness that I had to grind off.
Top of pagePrevious messageNext messageBottom of page Link to this message

Pontlee77
Posted on Tuesday, April 07, 2009 - 12:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I changed the 06 model for the 07 to prevent that and seems that the solution is worse than the problem, because before doing any thing i didn't have the problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mnrider
Posted on Tuesday, April 07, 2009 - 12:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Possible the wires were already damaged from the turning back and forth.I repair wires in cars and trucks where the wires flex near the door hinge often.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration