| Author | Message | ||
     Sekalilgai |
...noticed the XB12XP uses LED rear turn signals.... Y0526.1AU (left) Y0527.1AU (right) I think the 'AM' variants are on the 1125 a little spendy tho....maybe santa will be nice | ||
| Glenn |
Hi, Where did you get or look at the parts book? Is it online? Thanks | ||
| Froggy |
99574-09Y 2009 BUELL XB PARTS CATALOG Retail Price:$48.00 From your favorite dealer. I believe the part numbers you listed are the same ones the 1125R uses for rear signals. I plan on picking up a pair once they sort out the blown signal issue  | ||
| Sekalilgai |
+1 on what Froggy ... the 09 parts book consolidates all XB models in one book. I believe the 1125R signals have the AM (as opposed to AU) suffix. That is based on searching Badweb... | ||
| Ratbuell |
So what flasher does the XP use? (asks the guy who's working on getting CR mirrors to put on his '06 X...) | ||
| Froggy |
Rat from my understanding the 1125 turn signals have resistors built into them to simulate normal turn signals. | ||
| Ratbuell |
aah...hope the CR fronts are the same Worst case, a relay from Al will make it right... | ||
| Bertotti |
Might be stock but for bright leds I would use http://reuelattwood.com/buell/LEDs/index.html It's what I am doing as soon as the money isn't so tight. Plus when winter locks me in I will be finding a way to pull apart the tail light for him to mod. | ||
| Sekalilgai |
Joe It looks like the flasher is the same across the X,XT,XP,Ss,R...but I don't have the 1125 book Y0621.MC (Message edited by sekalilgai on November 02, 2008) | ||
| Ratbuell |
Ken - that would support that there are resistors built in to the LED signal packs. Thanks |
