| Author | Message | ||
     Chrisrogers3 |
So I was wondering what all the rattling was in my Uly lately. In the back of my head I knew it was the horn but didnt care enough to look. Well the damn flex tab plate broke that holds the horn to the support. So now its either grab one from a dealer or improvise. If the part is over 5 bucks, its time to improvise!  | ||
| Johnboy777 |
how about 6 bucks? horn: y0308.ta http://chicagoharley.com/shop/advanced_search_resu lt.php?keywords=y0308.ta&osCsid=c8c5df50a472284c78 50d193ad5b3766&x=29&y=9 . | ||
| Chrisrogers3 |
lol damnit, looks like its time to improvise! Maybe a piece of flat stock will do the trick. I should just spend the money and invest in a Stebel. Thanks for looking up the P/N for me. (Message edited by chrisrogers3 on September 26, 2008) | ||
| Kurbennett |
Go to Autozone and get a Fiamm Highway Blaster. About $15 but the improvement is noticable. | ||
| Etennuly |
To improvise; place the horn in it's original position, clamp in place, about 1/4" below where it broke off install one or two drill point screws. The cost is nearly twenty cents, but what the hey!  | ||
| Chrisrogers3 |
I just ended up repositioning, drilling, and remounting. It rattles a bit more now but it will work till I get a Stebel |
