G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tipsymcstagger Posted on Sunday, May 11, 2008 - 07:27 am:        Wondering how you guys secured the Centech in the under-seat area? I didn't realize the bottom of the AP1 is not flat. It's basically a printed circuit with four standoffs. Can you drill into the plastic under the seat or will that penetrate through to the underside of the bike? Thanks. Tipsy   Flynuly Posted on Sunday, May 11, 2008 - 02:00 pm:        I installed one inside a small pelican case with velcro. Drilled holes for the wires and used rubber grommets from Lowes to keep the gunk out. This route takes up additional space but it will be easily removed if I EVER move on to something different. 15K so far without issue.   Tipsymcstagger Posted on Sunday, May 11, 2008 - 09:17 pm:        Got any pictures of you installation FlynUly? Tipsy   Flynuly Posted on Sunday, May 11, 2008 - 10:16 pm:        Yes, but no access to them till the 15th. Will post then if you're still interested?   Tipsymcstagger Posted on Sunday, May 11, 2008 - 10:44 pm:        Sure...thanks. Tipsy

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: