| Author | Message | ||
     Ozarkdennis |
Does anybody make and sell good riser's for the Uly? I would like to raise the handlebar about an inch and set it back an inch. It's a comfort issue. | ||
| Treadmarks |
Check with Al at American Sport Bike.  Perfect match for the Uly and I did not need to replace my cables. | ||
| Curly |
twisted throttle has them also. | ||
| Ft_bstrd |
I use the Precision Engineering risers: http://www.preeng.com/xcart/product.php?productid= 5&cat=0&bestseller They don't rotate the bars rearward, but they do raise them about an inch. Very low cost option and the quality is very good! | ||
| Bertotti |
I just bought another top clamp and will use it once I file it flat. I will only get about a half inch of rise though. | ||
| Gotj |
Get another set if you're going to file them down. I am using two sets but didn't file either set. | ||
| Xb12lp |
I bought the Precision Engineering risers for my bike. The first set I bought was for the 1 1/8 bars and used fat bars, but the angle was to far forward for my short arms, so another purchase of the 7/8" risers and a set of bars from AL and things are good. I also bought and installed the Bar Snake liquid to reduce vibs. | ||
| Treadmarks |
+1 on the barsnake. I does make a difference. | ||
| Stewadi |
Between the Rox and the Precision Engineering do you have to adjust the cables or buy new ones or can you continue to use the stock cables? | ||
| Ft_bstrd |
I think you should be fine with the PE risers. They only change the height 1". | ||
| Bertotti |
Gotj I just needed a little rise and am hoping to bring the bars back just a touch. | ||
| Gotj |
Bertotti, Sorry that I misread your post. I inferred you were looking for more than the 1/2" rise. I'm not sure how the top clamps will help bring the bars back though. Are you just going to rotate them? | ||
| Bertotti |
Yep about a half inch. I'm short so that should take care of it. I find myself sliding way back on the seat and actually wish i could slide back another inch or so. I even rode on the pillion for a couple hundred miles one day. I figured i would go this route for the risers to see how much I like the change and the price was just under twenty buck if I want more I'll buy a second piece. Heck you were the one who turned me onto this in another thread, thanks great idea. |
