| Author | Message | ||
     Buellrider11960 |
 anyone know where i can locate/buy a bracket for driving lights; i know someone used to make/sell them here but he shut down shop | ||
| Maximum |
I spoke with an PIAA rep at homecoming, and he said that they want to make a light bracket specifically for the Uly. He stopped to ask me about my bike with the PIAA 510's mounted and I told him about the Ulytility bracket and how to contact the creator of it. We will see if anything happens. | ||
| Paochow |
If you are a DIY guy you can pick up a piece of angle aluminum from the local hardware store and make your own for under $20. | ||
| Chopped58 |
I made a pair out of some scrap flat stock I had laying around the garage. Bent two pieces about 6 inches long 90 degrees, located holes for the signal stalks, drilled and mounted. I powdercoated them black, and mounted hella ff50's on them. I saw this on someones bike from this website, but don't remember whose bike it was. It's been about 2500 miles, with no problems thus far.  | ||
| Michael1 |
If you do any offroading and have a set of PIAA 510's, make your bar pretty robust. I snapped and rewelded my Ulytility bar twice now. I'm in the works of making something a bit more robust. If I had a set of FF50's on there, I don't think it would matter. But I tend to ride off the beaten path and I put the bike through it's paces. Just something to consider. It is REALLY easy to make your own. |
