G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Horridus Posted on Wednesday, June 20, 2007 - 01:25 pm:        Just got them in. I was looking and reading about how to install them, should I just remove the caliper or is there a better way? Thanks in advance. Horr   Firstbatch Posted on Wednesday, June 20, 2007 - 01:46 pm:        No need to remove the caliper all the way.. Read this link/thread below and you will be fine. I chose to pull the wheel, then take the opportunity to put anti-sieze on the axle and also you can more easily clean out the caliper and push the pucks in to accept the new pads. http://www.badweatherbikers.com/buell/messages/327 77/263485.html}   Horridus Posted on Wednesday, June 20, 2007 - 02:10 pm:        Very nice Firstbatch, thanks!! Horr

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: