G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jmhinkle Posted on Monday, March 26, 2007 - 01:49 am:        I'll have my Drummer this week and will switch over to a Race ECM with it. Once I do the TPS reset on the ECM and get the bike running, what is next? Am I supposed to ride above a certain RPM for a certain time or something or just go out and ride like a hooligan thru school zones and church parking lots? Burnouts in the mayors driveway after flogging his daughter? What's the magic involved in getting everything set right?   Al_lighton Posted on Monday, March 26, 2007 - 09:32 am:        Just ride it. I'm assuming that you're not jacking your throttle around at all times. Once it is up to temperature and you're cruising, it'll learn on it's own. If you're cruising from 2-3K, it will learn a little low, and if you're cruising from 3-4K, it'll learn a little higher. But its always learning in steady state operation from 2-4K at temp, so don't sweat it. Al   Electraglider_1997 Posted on Monday, March 26, 2007 - 11:28 am:        Al, Are they ever going to add "timing" to the VDSTS software?   Scooter808484 Posted on Monday, March 26, 2007 - 02:51 pm:        Another VDSTS owner interested in timing   Jmhinkle Posted on Monday, March 26, 2007 - 05:16 pm:        Got it, thanks again Al for all the info you have supplied me with.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: