| Author | Message | ||
     Xring60 |
Are there any company's here in the U.S. that make bar risers and/or adapters for 1.125 bars or .875"? | ||
| Jmhinkle |
Here ya go. Supposedly he is making a Uly specific model now, but these will work. http://www.roxspeedfx.com/cgi-bin/cart/showitems.c gi?subcat_id=268 If you are wanting to raise your bars cheaply, you check out this thread on the $18 handlebar risers. Basically, you can buy a top clamp, flip it and get 7/8" or two to get 1 1/2". http://www.badweatherbikers.com/buell/messages/142838/228937.html (Message edited by jmhinkle on February 13, 2007) | ||
| Javadog |
I called the owner and talked with him last month I think. He said he did have an anti-vibration riser for the Uly but it was not on the website. Looks like first rate machine work. I might get one later this spring. | ||
| Buellish |
I spoke with Roxspeed around the 1st of this month and they said to call back in two weeks on the Uly specific riser. | ||
| Treadmarks |
I have the rox risers in the 2" rise, and they work great without having to install longer cables. The owner, (Rocky) will have some midnight black 2" and 3" Uly specific risers available soon. I have been giving him some space, due to the fact that they support the snowmobile community and the harsh winter they are still going through.  I have some pics posted somewhere in the archive. |
