G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pso Posted on Friday, July 07, 2006 - 04:03 pm:        Does anyone know of any replacement bars that are a little higher than the stock ones that will not require new cables or controls. The width is fine Thanks Paul   Blitzen Posted on Friday, July 07, 2006 - 07:06 pm:        Check with Heli Modified in Cornish Maine. they specialize in making touring modifications. Their web site is www,helibars.com if they dont have it yet suggest it ti them. I had one of their triple trees on my xb12R and it brought my bars up and back 3 1/2 inches total   Buelldualsport Posted on Friday, July 07, 2006 - 09:49 pm:        SW Motec has a set of risers that are 1" higher and 1" back, that do a great job. Much easier than replacing the handle bars. We got ours from AdventureWarehouse. Found them on Advrider.com Good Luck Ride Em   Pso Posted on Saturday, July 08, 2006 - 09:07 am:        Hey Buelldualsport, I was alll over Advrider.com and did searches and then went looking for AdventureWarehouse with different search engines, and I was not able to find anything. It sounds like these risers are exactly what I am looking for. Could you give me better directions on how to find them? Much appreciated Paul   Javadog Posted on Sunday, July 09, 2006 - 06:35 pm:        Try this one ,mate http://www.twistedthrottle.com/trade/productlist/217/ Also, the one referenced from Advrider is Adventurer's Workshop at adventurersworkshop.com G'dday (Message edited by javadog on July 09, 2006)   Asdf Posted on Sunday, July 30, 2006 - 09:23 pm:        Ok, I'm a Dunce... I have watched this thread since it was originally posted. I have been looking for handlebar risers for a Ulysses for many months. I started looking for risers several months prior to me buying my Ulysses in May. I have checked out the sites and links posted in this Thread. I have searched this site and other sites. I have searched the Web. I have checked with my Dealer... I have not found handlebar risers that will fit a Ulysses. I have certainly found plenty of risers for many bikes. However, a set of risers that will work on a Ulysses, seems to elude me. The Ulysses bar clamp pattern, which is at an angle to the handlebar, and is not square with the handlebar, seems to be a unique Buell pattern. Folks have told me that such a critter is available, but so far, I have not found them for a Ulysses. Where am I going wrong?... Help! Thanks!   Captainxb Posted on Monday, July 31, 2006 - 12:36 am:        Check the Trojan-Horse store. There are ones for the XBS models. Aren't the Ulysses the same setup?   Asdf Posted on Monday, July 31, 2006 - 08:32 am:        YES!!! Thank You!   Pso Posted on Monday, July 31, 2006 - 11:34 am:        I pressently have an order in for the from Trojan. Will let the board know how they work once they arrive. Paul

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: