Author |
Message |
Buelldyno_guy
| Posted on Tuesday, January 31, 2006 - 11:13 pm: |
|
This will also be posted elsewhere, but I had to let those who play here know. ... My 06 XB12X made the mark today and I still have a little more to work on. ... I had been thinking the final number might be as high as 102, but made a big step today with consecutive runs at 100+. ... For those who are watching what Al Brian and I are doing it's just not about the final numbers. It's more about how easily it gets there. The torque flattened out today and is very close to 75 ft / lbs @ 3K with a peak at 84 ft / lbs. ... Al will post the run sheets under the American Sport Bike banner when I am done. Next week we will run an XB9 with a American Sport Bike Open Airbox and Micron, before it becomes a Revolution Performance 1208 Big Bore. ... That will be followed by the same for an XB12 to become a Rev Perf 1500 Big Bore. ... Brian will post those results when I am finished tuning the bikes. ... God This Is Fun. ... Terry |
Charlieboy6649
| Posted on Wednesday, February 01, 2006 - 01:08 am: |
|
Anxiously awaiting the XB9 test as that's what I want!!! |
Buelldyno_guy
| Posted on Wednesday, February 01, 2006 - 01:27 am: |
|
The customer has agreed to allow us to install the Micron and American Sport Bike Open Air Box tune it. ... Then we will remove the engine to build the Rev Perf Big Bore Install a "Safe MAP" for break-in and then re-tune for performance. ... Brian doesn't know yet, but Al and I are excited. ... More later. ... Terry |
|